IZZY ZF-388
IZZY ZF-388 is a concrete admixture of a very water reducing type. The polymer mixture helps to reduce the water to cement ratio to a lower level and will help to reduce water effectively. This results in a higher compressive strength of the concrete, especially the early compressive strength. The characteristics are equivalent to ASTM C494 Type F standards.
Product Category
Size
Contact
IZZY ZF-388 is a concrete hardener and work enhancer suitable for the remaining work. Still giving a significant amount of visible shrinkage and updating the compressive strength to allow the work requiring compressive strength and the formwork to be removed during the color period, such as pile work, foundation work, bridge beams, concrete wall work, prestressed concrete
- Can reduce water by more than 30% for concrete that is not a chemical solution
- Can reduce the amount of water to the efficiency of concrete with compressive strength
- Have a concrete beam without using compression
- Have an opinion on the concrete itself and the elongation time in casting and the length of the formwork
- Helps to be effective continuously and continuously strong and can be compressed early
- Increase the damage to the body by claiming that there is a sign of water to the warning
- Often occurs in cases where there is a need for water and helps resist water permeability
- Reduce the shrinkage efficiency (Shrinkage) down to the shrinkage and reduce creep (Creep) when the concrete hardens
The proportion of use is approximately 800-3000 cc per 100 kg of cement or cement mixed with pozzolan such as fly ash. It is recommended to conduct a test to find the appropriate amount of use.
Mix IZZY ZF-388 in appropriate amount through the automatic liquid suction system through the water pipe to the concrete mixer. Avoid adding liquid directly to the dry mixture.
IZZY ZF-388 is made from substances that are not harmful to health. Hygiene precautions should be followed. Operators should wear chemical protective clothing, gloves and goggles and should be in a well-ventilated area. In case of skin contact, wash with soap and plenty of water. In case of eye contact, rinse with plenty of water and seek medical attention immediately.
Technical data
- Appearance : Liquid
- Color : Clear
- Specific gravity : 1.02-1.05 kg/liter
*Test temperature 30-35 degrees Celsius - PH : 7-9
- Initial setting time : 3.00 hours
- Final setting time : 4.45 hours
*Tested on Izzy Con standard concrete mixes, test temperature 30-35 degrees Celsius
Other required data
- Packaging size : 1000 liters per bulk
- Can be stored for 12 months in original packaging
- Should be stored at normal temperature (Shelf life may be reduced if stored in high heat or humidity.)