Z-PatchMCI

Cement mortar repairing concrete

Fiber cement mortar for repairing non-shrinking precast concrete

Z-PATCH MCI is a concrete repair mortar with specially selected materials to make it a fine and smooth repair material, and also contains corrosion inhibitors to prevent reinforcement.

Z-PATCH MCI is suitable for strengthening concrete surfaces, structural repairs in buildings, marine structures, bridges and other infrastructures, and structural reinforcement.

Product Category

Size

25 kg

Contact

Z-PATCH MCI is a fine repair mortar ready to use for repairing concrete surfaces, including small pores, blemishes and minor surface damage. It can also be used to repair damage caused by corrosion of concrete surfaces.

  • Repair of general concrete structures or plastered brick walls
  • Cracks, chips on various edges, such as cracks in concrete walls or plaster
  • Swelling due to rust in structural steel
  • Defects or cavities caused by incomplete pouring of concrete
  • Repair damaged structures or reinforcement
  • Repair concrete floors by plastering, no sagging, easy to use
  • Good adhesion
  • Non-shrinking, non-toxic, non-corrosive
  • High durability and strength
  • No chlorides or salts that may cause corrosion

Mix Z-PATCH MCI with clean water at a ratio of 1 bag of Z-PATCH MCI/25 kg. Approximately 3.75-4 liters of water should be used.

Surface preparation

  1. Before use, clean the surface to be clean, free from stains such as oil, grease or cement residue.
  2. Before plastering, the original concrete surface should be moist or soaked with water.

 

Mixing

Mix Z-PATCH MCI with clean water in a ratio of 1 bag of Z-PATCH MCI/25 kg. Approximately 3.75-4 liters of water should be used. Mix thoroughly using a low-speed mixer for approximately 2-3 minutes to ensure a smooth, lump-free, uniform texture.

 

How to use

  1. Remove damaged concrete
  2. Clean the repaired area thoroughly using a high-pressure water jet to remove all debris and contaminants
  3. Apply IZZY LT-82 concrete sealant to the area to be repaired
  4. Use Z-PATCH MCI to repair the damaged areas as needed
  5. Once the repair mortar has hardened, apply IZZY ZBB-880 to coat the surrounding area to help smooth the concrete surface, reduce air bubbles that may occur on the concrete surface, and prevent water from washing away on the concrete surface

Z-PATCH MCI is an alkaline substance, made from substances that are not harmful to health. Hygiene precautions should be followed. Operators should wear chemical protective clothing, gloves and eye protection and should be in a well-ventilated area. In case of skin contact, wash with soap and plenty of water. In case of eye contact, rinse with plenty of water and seek medical attention immediately.

Technical data

  • Physical characteristics………………….……..……..Gray powder
  • Density…………………~2.20-2.30 kg/L

 

Other required data

  • Package size : 25 kg/bag
  • Shelf life: 12 months after opening